Faucet leakage cause faucet leakage solution

The faucet is inseparable from each of our families. When we choose, everyone pays attention to its quality. Because the faucet is used frequently, it is easy to have some problems, including the leaking of the faucet. How can we solve this kind of problem? 

Cause of water leakage

1. The reason for the water leakage at the water outlet is that the gasket at the inner shaft position of the faucet is broken. The gasket in this position will continue to be worn when the faucet is opened and closed, and it will inevitably wear out more and more after a period of use.

The method adopted by many friends is to directly replace the faucet. In fact, the faucet's bolt and gland are removed, the old gasket is taken out, and the new gasket can be solved.

2. In addition to the water leakage from the faucet of the faucet, water leakage often occurs in the lower part of the faucet. These leaking water leaked from the lower gap, so many friends thought that the faucet was broken, and it was often the method of directly replacing the faucet. The cause of this water leakage is that the triangular sealing gasket in the gland is broken, not the faucet casing is broken. When the triangular gasket is worn too much, it will cause the lower seam to be sealed.

In fact, there will be water leaking from here.

3. The connection between the faucet and the water pipe is fastened with a cap nut. If the nut is loosened or the wire is slipped, water leakage will occur here. This is also the third most common case of faucet leaks. But this leak may not be easy to find. Because the faucets in the furniture kitchen and bathroom are mostly installed on the sink or washbasin, the connection is hidden under the sink and the washbasin, so it is not easy to find.

Look at the faucet leak solution

1. Close the inlet valve. Remove the small screws on or behind the faucet handle to remove the handle that is attached to the faucet body. Some screws are hidden under metal buttons, plastic buttons or plastic sheets that are snapped or screwed into the handle. Just open the button and you will see the handle screw on the top. If necessary, use some osmotic oil like WD-40 to loosen the screws.

2. Remove the handle and look at the parts of the faucet. Use a large pliers or adjustable wrench to remove the packing nut, taking care not to leave scratches on the metal. Rotate the spool or shaft in the same direction as when you turned the faucet to unscrew them.

3. Remove the screws that secure the washer. If necessary, use an infiltration lubricant to loosen the screws. Check the screws and spools and replace them if they are damaged.

4. Replace the old gasket with a new one that is identical. New gaskets that are almost perfectly matched to the old gaskets generally allow the faucet to no longer drip. Also note that the old gasket is either beveled or flat and replaced with the same new gasket. A gasket designed only for cold water will swell significantly when hot water flows to block the water outlet, making the hot water flow slower. Some washers work in hot and cold water, but make sure that the gasket you bought for replacement is exactly the same.

It will be a problem when we use the faucet for a long time, and it is very important to learn how to deal with it. The above is the reason why the faucet leaks introduced by Xiaobian today and the solution is here. If you want to know more information, please continue to pay attention to the decoration home.

More related wonderful reading:

What should I do if the faucet leaks? What kind of faucet to buy?

What should I do if the faucet leaks? How to buy a faucet?

Kitchen faucet leakage reason kitchen faucet leakage maintenance method

What should I do if the kitchen faucet leaks? What are the kitchen faucet styles?

How to do the washing machine faucet when the washing machine faucet leaks

Washing machine faucet to buy washing machine faucet leaking reason